Cooper Menvier SD3 Manuale dell'Operatore Scaricare il pdf (Pagina 4)

Main Features

The SD2 provides a means of communicating alarm information from a

control panel to either a standard or a mobile telephone. The unit normally

connects to an alarm control panel, which provides the necessary power

and battery back up.

Triggers:

The SD2 has four trigger inputs. You can assign a voice message and/or a

text message to each input. The unit can also send a message/or a text

message when the triggers have been restored.

For most applications you may connect the trigger inputs to an alarm

control panel's communicator outputs or bell output. You can also connect

other devices, such as smoke detectors or temperature sensors, directly to

the trigger inputs. The unit allows you to program the polarity of the

trigger inputs as either positive or negative applied/removed.

Contacts:

The SD2 will store up to 10 contacts: you can assign each one a name,

telephone number, message type, and acknowledgement type.

DO NOT use the SD2 to call the Police via the Emergency Services phone

numbers.

Voice Messages:

The SD2 has a built-in microphone and speaker to allow you to record and

replay audio messages directly from the unit.

The SD2 can store up to four separate alarm messages, four restore alarm

messages (a different message can be sent when the trigger event has

been removed) and one common message (normally used to store the

name and address of the premises). Each message can be up to 30

seconds in length. Voice Messages A and Voice Restore Message A are

related to trigger input 1; Voice Messages B and Voice Restore Message B

are related to trigger input 2 and so on.

Make sure that you record voice messages that reflect the type of alarm

that is connected to the trigger input. For example, if you connect input 1

to the fire output of an alarm/fire control panel then make sure that

Message 1 states that there is a fire alarm at the premises.

1 2 3 4 5 6 7 8 9 ... 55 56

Nessun commento

Cooper Menvier SD3 Manuale dell'Operatore Pagina 4